XTOOL D9EV
XTOOL D9EV är restbeställd och skickas så fort den finns i lager igen.
Det gick inte att ladda hämtningstillgänglighet
Beskrivning
Beskrivning
Den mest kraftfulla skannern med avancerade funktioner för både elbilar och bränslen
XTOOL D9EV är ett banbrytande diagnostiskt verktyg speciellt designat för elfordon (EV). Denna professionella bilskanner är en uppgradering från den populära D9-modellen, som innehåller kraftfulla nya funktioner som EV-diagnostik, offlinebatterianalys och högspänningssystemtestning. Vid sidan av dessa nya funktioner behåller D9EV alla avancerade funktioner i D9, inklusive avancerad ECU-kodning, PMI, dubbelriktad kontroll, intelligent topologikarta för OE-nivå full scan, steg-för-steg guidade funktioner för VAG och support för DoIP & CAN FD-protokoll. Den täcker över 10 000 fordonsmodeller, vilket säkerställer omfattande täckning för bilproffs.
Nyckelfunktioner
EV-specifik diagnostik och batteripaketanalys
- Få tillgång till högspänningssystemmoduler för att läsa och rensa koder, se livedata.
- Utför batteripaketanalys med ett klick och tillhandahåller SOC, SOH, spänning, temperatur och mer.
- Bygelkopplingsdiagram med alternativ för komplett vård av elbilar.
Intelligent topologikarta
- Ger enkel visning av status mellan olika moduler.
- Identifierar snabbt felaktiga moduler med felkodskontroller med ett klick och grafisk livedata.
- Minskar gissningar och sparar tid med 60 % snabbare systemsökningar.
- Obs: Tillgängligheten kan variera beroende på fordon.
ECU-kodning och programmering
- Offlineprogrammering (PMI) för Ford-, Lincoln- och Mazda-fordon för att uppdatera ECU-programvara/firmware.
- ECU-kodning och guidade funktioner för VW/Audi/Skoda att matcha, koda nya ECU:er och anpassa bilinställningar.
- Obs: Endast tillgängligt för specifika fordon.
Fullständiga dubbelriktade kontroller/aktiva tester
- Skicka kommandon till fordonsmoduler och ta emot information från ECU:n för aktiva tester.
- Utför tester som EVAP, kompression, kylfläkt, ABS-pumpcykling och kontrollera fönster, torkare, taklucka och dörrar.
- Obs: Tillgängligheten för Active Tests-menyn varierar mellan olika fordon.
42+ Omfattande tjänster
- Inkluderar oljeåterställning, EPB, SAS, Throttle, BMS, ABS Bleed, injektorkodning, nyckelbricka programmering, Fuel Trim Reset, Cylinder Power Balance, vevaxelsensorer omlärning och mer.
- Obs: Kontrollera kompatibilitet med VIN-nummer innan köp.
Utökningsbara funktioner
- Kompatibel med tillägg som professionella nyckelprogrammerare (KC100, KC501, KS1, KS2, M821), digital inspektionskamera (XV100) och EEPROM-adapter.
- Obs: Tillägg ingår inte och måste köpas separat.
Programuppdateringar och teknisk support
- Inkluderar 3 års programuppdateringar för optimerade funktioner med Wi-Fi-uppdateringar med ett klick.
- Ger 2 års responsiv teknisk support för pålitlig kundservice.
Kompatibilitet
Innan du köper XTOOL D9EV, vänligen verifiera kompatibiliteten med din specifika fordonsmodell.
Vårdinformation
Vårdinformation
Var medveten om att de diagnostiska funktionerna som är tillgängliga med fordonsdiagnostiska skannrar kan variera beroende på den specifika fordonstillverkaren, modell och år. Även om dessa skannrar ger omfattande diagnostiska funktioner, kan vissa fordonsmärken eller modeller ha unika system eller proprietära protokoll som antingen kan begränsa eller förbättra de tillgängliga funktionerna. För att undvika problem för dig, vänligen kontakta oss för bekräftelse innan du köper.
Leverans och frakt
Leverans och frakt
- Skattefritt
- 2 års garanti
- livstids teknisk support.
- Pengarna-tillbaka-garanti
- Fri frakt
- 2-5 dagar snabb leverans
XTOOL D9EV
Betalning & Säkerhet
Betalningsmetoder
Din betalningsinformation behandlas säkert. Vi lagrar inte kreditkortsuppgifter och har inte heller tillgång till din kreditkortsinformation.
This XTOOL D9EV automotive diagnostic scanner combines nearly all advanced diagnostic features to meets your above needs:
- HV System Diagnostics & Battery Pack Analysis: Access into the HV system modules for EV vehicles to locate car faults by reading and clearing codes, live data, also monitor battery pack status, provides Jumper Connection Diagram.
- OE-Level Full System Diagnostic with Topplogy Module Mapping: With Topplogy Map for faster full system diagnostic to view the communication structure between modules clearly with all the situation of each system.
- 42+ Maintenance Services & Full Special Functions: Provides more options to professionals than they ever going to need for daily auto maintenance services jobs including those most used and those not.
- New added Programmable Module Installation(PMI) function: When you replace or initialize a new/used module fo Ford/for Lincoln/for Mazda, XTOOL D9EV allows you to copy the data from the original module and install it to the new unit to finish the module replacement.
- Bi-Directional Control: Full control over all various vehicles components to perform active tests to pinpoint car issues.
- Support CAN FD/DoIP: Access new communication protocols of CANFD (for GM MY2020+ models), and DOIP (for BMW E/F/G Chassis, for Jaguar, for Land Rover vehicle makes)
- Advanced ECU Coding & Refresh Hidden Functions: XTOOL D9EV performs Online Coding to flash the hidden features, Personalized Settings, or disable the annoying functions, and reprogram the adaptive data for certain components after repairs or replacements.
- Guided Functions: Help your diagnostic step by step with instructions for VW/for Audi/for Skoda, etc.
- Top Hardward Configuration: Android 10.0 systems, 9.7'' Touch Screen, 10000mAh Battery, 1024*768 Resolution, Quad-Core 1.8GHz CPU Processor, 2G RAM & 128G
- BT Connection & Wired Connection via USB Type B cable: 2.4Ghz & 5Ghz WiFi, BT Connection make it easy to move from the dash to the front of the car. With the USB cable along with Bluetooth, the user has convenience along with certainty that the system will work one way or another.
Why XTOOL D9EV can work as a car doctor for New Energy Vehicles?
Based on the needs of EVs for electronic control system and the battery diagnostics, XTOOL D9EV with new developed diagnostics functions, can easily diagnose high-voltage system, obtain detailed information on each module of the battery pack and locate faults, and diagnose electric control modules such as motors, which is unlike traditional diagnostic tools. It provides HV system and battery pack diagnostics:
OE-Level High-voltage System Diagnostics
Like “dealership” EV scan tools, it can read & clear DTCs & live Data of EV vehicles exclusive high-voltage system with just one click. It provides a comprehensive overview of the entire HV system structure and identifies the location of faulty parts. It also provides Jumper Connection Diagram with connecting options via Jumpers for your complete EV vehicle care.
In-Vehicle/ Out-of-Vehicle Battery Pack Analysis
D9EV allows to you deeply check the battery working status with battery modules both installed in vehicle or out of vehicle. This helpful function shows each battery module's exact location, displays the State of Charge (SOC) and State of Health (SOH) of the battery pack, along with other important data such as voltage, current, and temperature for easy comprehension of complex EV battery information.
XTOOL D9EV Car Diagnostic Scanner, ALL-IN-ONE Scan Tool for Pro Techs!
Advanced ECU Coding
XTOOL D9EV scanner can perform online coding, components matching, adaptive data reset and flash hidden functions, to enhance vehicle performance and personalize car settings after replacing the ECU by: Online/Offline ECU coding, Refresh Hidden Functions, Guided Functions for VAG!*Not work on all vehicles, please check the compatibility first!
PMI Functions
XTOOL D9EV scanner diagnostic scan tool allows you to copy the data from the old/damaged module module and install it to the new unit to finish the module replacement, offers solution for Ford/Lincoln/Mazda after replacing the module.Note: Only works for Ford/Lincoln/Mazda, not all modules can be supported, please provide the VIN & modules for compatibility checking via Info@xtoolglobal.com
OE Full Systems Diagnostics
Performs in-depth diagnostics for all available systems: Engine, Trans, Body, SRS, Brake, Chassis, HVAC, Fuel, etc. It can read/clear codes, view ECU info, freeze frame, view live data like oil/transmission/coolant temp, speed/O2 sensors, engine rpm, long/short fuel trim, cylinder rates, battery voltage, and more).
Bidirectional Control
XTOOL D9EV car scanner diagnostic tool can use active tests to output commands to the ECU, to turn on/off control modules or components without using the vehicle controls, thus saving diagnosis time, such as Open/Close Windows | Doors | Sunroof, Turn on/off Lights | Radiator Fan | Sound Horn | Fuel Pump, Modulate the Throttle, Operate Mirrors, Test Door Lock, etc.
Live Data Graphing
8-In-1 Graphing: Allow you to customize specific PID, and merge graphs for up to 8 data PIDs combined at one time in one view.✔ Graph up to 8 sensors individually on the same screen.
CAN FD & DoIP Protocol
With CAN FD protocol to support for GM 2020+ vehicles, ✔ with DoIP protocol to support for BMW E/F/G Chassis, for Jaguar/for Land Rover.
CAN FD & DoIP Protocol
With CAN FD protocol to support for GM 2020+ vehicles, ✔ with DoIP protocol to support for BMW E/F/G Chassis, for Jaguar/for Land Rover.
Get more out of the XTOOL 2024 Newest D9EV Auto Diagnosic Bi-Directional Tool
- Oil Light Reset
- BMS Reset
- Injector Coding
- Window Initialization
- A/F settings
- Language Change
- Power Balance
- Speed Limit
- EGR Relearn
- VGT Relearn
- Control unit Reset
- EPB
- Throttle
- Key Programmer
- Seat Calibration
- Start/Stop Reset
- Transporte Mode
- EEPROM
- Clutch Adaption
- FRM Reset
- HV Battery
- Odometer Read
- SAS
- TPMS Reset
- Gearbox Match
- Headlight
- Airbag Repair
- Tire Upgrade
- Electronic Pump Activation
- SRS
- Nox Reset
- A/C Relearn
- DPF
- ABS Bleeding
- Suspension
- ECU Configuration
- Instrument Cluster
- Gear Learning
- ADAS Calibration
- AdBlue Reset
- Write VIN
- Rain/Light Sensor
*NOTE: Special functions available vary across vehicles. Please check compatibility with the VIN and the required functions!
Intelligent Topology Mapping To Boost Repair Efficiency By 65%
XTOOL D9EV smart diagnostic tool features Module Topology to scan all available car modules and show color coded diagnosis status in tree mapping that reveals the underlying communication structures between modules.
- Get diagnostic results in color coded modules at one glance
- Dive into the fault right on the tree mapping
- Prevent “false” fixes by considering all inter-connected modules to boost repair efficiency by 65%
NOTE: Module Topology are not available to all vehicle makes for now. Available for GM, for CHRYSLER, for JEEP, for DODGE, for FORD, for TOYOTA, for NISSAN, for HONDA, for BMW, for BENZ, for HYUNDAI, for MAZDA, ect.
- BT connection & Wired connection: XTOOL D9EV offers BT connection feature to achieve remote diagnosis at a long range, get rid of the shackles of cables, make it easy to move from the dash to the front of the car. Besides, you can use the USB to Type B cable to achieve wired connection.
- One Click WIFI Update: D9EV car automotive scanner With 2-Year Free Software Update, you are free to update available softwares in any times. Recommend to download the newest software if it is available to get the best experience, as we always focus on our scanner to optimize user experience and improve software issues, improve vehicle coverage and the accuracy of repair.
- AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
- Cover 14+ menu languages: XTOOL diagnostic tool D9EV Supports 14+ menu language. Please send the Serial Number(S/N) to change English to Spanish, Portuguese, French, Japanese, German, Polish, Russian, Italian, Korean, Dutch, Swedish, etc.
- Report share and print: D9EV auto diagnostic scan tool enables diagnostic tech or mechanics to generate diagnostic reports before and after car diagnostics and maintenance services by printing it out or sending it to customers via PDF.
- Cover 10,000+ Vehicles, Up to 2022, 2021, including cars, SUVs, minvans, 12v light-duty trucks
- Support CAN FD Protocol: With CAN FD protocol covers with GM MY2020+ models. No extra CAN FD adapter needed.
- Guided Functions: With VAG Guide Functions, D9EV can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/for Audi/for Skoda, etc.
