エクスツールインプラス IK618

XTOOL IK618 Covers Both Whether It's Key Programming or Diagnostic Functions

1. IK618 With High-Performance Key Programming Functions

XTOOL IK618 key programmer packed with comprehensive key programming functions includingBackup IMMO data, Check number of keys, Program/Add keys Fobs,Generate dealer key, Program remote, Write-enable functions etc, It is ideal for professional mechanical, autoshop, repairing shop! Note: Functions vary across vehicles, please send VIN to verify purchase!

2. KC100 Key Programming and EEPROM Adapter Included

XTOOL IK618 comes with no fees KC100 car key programmer & EEPROM adapter(Save up to $300), allowing you to read remote frequency and generate dealer keys for VW/for Audi/for Fiat/for Renaul/for Land Rover.

XTOOL IK618 comes with no fees KC100 car key programmer & EEPROM adapter(Save up to $300), allowing you to read remote frequency and generate dealer keys for VW/for Audi/for Fiat/for Renaul/for Land Rover.

3.To Extend More Capabilities With KC501, KS01, M822

• Works with KC501 car key programmer tool + M822 adapter + cable kits (Need Purchase Separately) toRead/Write Infrared Key for Mercedes-Benz.
• Works with KC100 +ks-1 key programmer + M822 adapter + cable kit ( Need Purchase Separately) for Toyota. 4. Advanced ECU Coding & Flash Hidden Functions

4. Advanced ECU Coding & Flash Hidden Functions

XTOOL IK618 automotive scanner diagnostic tool allows you to code/match the new ECUs, and customize the vehicle as needed, optimize the specific performance to improve fuel efficiency, reduce power loss, improve the durability of mechanical parts, etc.

5. Full System Diagnostic and 31+ Special Functions for Maintenance Necessary

XTOOL IK618 car diagnostic scanner enables you to deepen into all accessible systems-ABS, SRS, Engine, AT, SAS, BCM, TPMS, IMMO system, etc. to read & erase all the fault codes, view live data, read freeze frame data, read ECU Information. XTOOL scanner IK618 also come with 31+ most popular special functions to provide you daily maintenance including Oil reset, EPB service, SAS reset, BMS reset, Throttle body relearn,TPMS Reset,Gearbox Match,ABS Bleeding, Injector Coding, etc. also advanced features-CAM Crank Relearn, Crankshaft Relearn, Idle Relearn, Fuel Trim Reset, Alcohol Content Reset, ABS Initialization, etc.

6. Full Bi-directional Control & VAG Guided Functions

XTOOL IK618 is also a full bidirectional scan tool, allows sending commands to the ECUs to perform active tests, like EVAP Tests, A/C Clutch Test, Fuel Injector Test, Window/Door/Sunroof Test etc. Also provides a smart manual with step-by-step instruction for VW, for Skoda, etc.

7. IK618 CAN FD Protocol & Vehicles Coverage Support

XTOOL scan tool IK618 supports CANFD protocols for GM, for GMC, for Cadillac, for Chevrolet, for Buick Cars after 2020. Its compatibility with over 95% of all vehicles, extensive car coverage, provides an every diagnosis option a mechanic/auto repair shop could need.

NOTE: IK618 Key Programming is suitable for Brazil Renault, GM, FIAT, VAG and etc. For Russian LADA, Renault and etc. For Malaysia Perodua, Proton and etc. For France Renault, Megane and etc.

IK618 FULL-FUNCTIONAL IMMO & KEY PROGRAMMING

Upgraded Ver. of X100 PAD PLUS/PADS, XTOOL IK618 key programmer packed with comprehensive key programming functions including Backup IMMO data, Check number of keys, Read PIN code & key info, Program/Add keys Fobs, Generate dealer key, Program remote, All keys lost, EEPROM modification,Write-enable functions etc, It is ideal for locksmith, professional mechanical, auto-shop，repairing shop!

Backup IMMO Data: Used to read, write and backup the EEPROM chip inside the immobilizer module.

Check Number of Keys: check out how many keys that had been registered to the vehicle right now.

Read PIN Code & Key Info: Pull PIN code of the immobilizer of specific vehicles when it requires a pin to get access to the system.

Program/Add Keys Fobs: Add another new key when you have a key that has already matched to the vehicle.

Generate Dealer Key: Used for generating dealer keys for Volkswagen/ for Audi/ for Fiat/for Renault/for BMW/for Land Rover, etc.

Program Remote: Read the radio frequencies of the car remotes and program remote keys.

All Keys Lost: Make a new key in the situation where you have no active keys at the moment.

EEPROM Modification: Allows you to modify EEPROM chip when unsoldered.

Write-enable Functions: Allows you to write key information inside the dump files.

Note : Functions vary across vehicles, please send VIN to verify purchase!

WORK WITH KC100 AND EEPROM ADAPTER(BOTH INCLUDED)

XTOOL Inplus IK618 enables you to program keys for VW, for Audi, for Fiat, for Renaul, for Land Rover, etc. with KC100 key programmer. It also allows you to read and write the chip data, data recovery with EEPROM Adapter.

COMPATIBLE WITH KC501, KS-1, AND MORE PROGRAMMERS

XTOOL IK618 comes standard with KC-100 key programmer. However, you may choose to get KC-501, KS-1, KS-2 key programmers to extend its capabilities to the next level.

It's also can work with the CAN FD adapter and M821.

• Key Programming for VW, Audi, Skoda, Seat, Bentley, 4th, 5th, MQB IMMO.
• Key Programming for BMW CAS1-4.
• Key Programming for Mercedes Benz FBS3.
• Works with KC100 Key Programmer(included): for VW, for Audi, for Skoda, for Seat, for Bentley 4th & 5th IMMO.
• Works with EEPROM Adapter(included): for EERPOM reading and writing while key programming.
• Works with KC501 Key Programmer (not included): For VW 4th, 5th IMMO, for Benz Infrared Key Increased, Read and Write Chip.
• Works with M821 Key Programmer (not included): ALL Key Lost for Mercedes-Benz(need with Benz Cable).
• Works with M822 Key Programmer (not included): M822 Contains the Functions of M821, ALL Key Lost for Toyota 8A/4A chip smart key, ALL Key Lost for Mercedes-Benz(need with Benz Cable).
• Works with KS-1 Key Programmer (not included): ALL Key Lost for Toyota Smart Key& Lexus.
• Works with SK1 Key Programmer(not included): For 2013-2022 Toyota/ Lexus Models with 8A/4A Chip Smart Keys, Add Key/ All Key Lost, Emergency Start. Frequency & Key Type Reading.

IK618 PROVIDES ECU CODING & SPECIALIZED FUNCTIONS & VAG GUIDED FUNCTION

Advanced ECU Coding

ECU Coding for VW/for AUDI/for SKODA/for BENZ/for Mitsubishi: XTOOL IK618 automotive diagnostic scanner performs ECU Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings.

Flash Hidden Functions(ECU Configuration)

Flash Hidden Functions(ECU Configuration) for BMW/for VW/for AUDI/for SKODA/for TOYOTA/for LEXUS/for SCION/for MAZDA/for FORD/for LINCOLN: IK618 helps to activate the higher-level car functions and disable any annoying features including disabled the seat belt buzzer, wind the windows down with the remote fob, deactivate the Start/Stop function, etc.

VAG Guided Function

VAG Guided Function for VW/for AUDI/for SKODA, Featuring guided functions, XTOOL IK618 key programmer immobilizer allows you to complete the complicated functions under the step by steps instructions with no troubles and no worries.

XTOOL IK618 CONDUCTS OE-LEVEL ALL SYSTEM DIAGNOSTIC

IK618 bi-directional scan tool comes with OE level all systems diagnostic capabilities that you can only find in dealer-tool previously. It can scan all available systems to perform diagnostics including:

• Read Codes: including manufacturer-specific codes, pending codes, permanent codes.
• Clear Codes: Clear codes, reset monitors and turn off warning lights.
• Live Data: Live data stream from various sensors including misfire, engine rpm, transmission fluid temperature, etc.
• Freeze Frame: Retrieve parameters when DTC is recorded for better diagnostics.
• ECU Information: Check ECU version, etc.

DISPLAY 8-IN-1 LIVE DATA GRAPHING

XTOOL IK618 display live data stream in text or graph like misfire data, engine rpm, transmission oil temperature, mass air flow sensor data, cylinder balance rates, fuel pressure, actual fuel temperature vs desired fuel temperature, etc.

FULL BI-DIRECTIONAL CONTROL (ACTIVE TESTS)

XTOOL InPlus IK618 bi-directional scanner supports active test to output the command into the ECU to request information or command a module to perform specific tests and functions. To find faults in the subsystems of your car effortlessly, without using the vehicle’s control, including Injector Buzz Test, Window/Mirror/Door Lock Test, A/C Clutch On/Off, ABS Pump Cycling, Pump and Value Tests, Interior & exterior lights Test, Sound horn Test, More...