• Ingyenes szállítás

    Minden rendelésre

  • Két év garancia

    Gondtalan vevőszolgálat

  • Könnyű visszaküldés

    30 napos pénz-visszafizetési garancia

  • Nincs IP korlátozás

    Kompatibilis a globális járművekkel

XTOOL D9EV

€2.533,95 EUR
Szállítás pénztárnál számítják ki.
XTOOL sorozat termék-összehasonlító táblázata

Leírás

Der leistungsstärkste Scanner mit High-End-Funktionen für Elektrofahrzeuge und Kraftstoffe

Das XTOOL D9EV ist ein hochmodernes Diagnosetool, das speziell für Elektrofahrzeuge (EVs) entwickelt wurde. Dieser professionelle Autoscanner ist ein Upgrade des beliebten D9-Modells und enthält leistungsstarke neue Funktionen wie EV-Diagnose, Offline-Batteriepackanalyse und Hochspannungssystemtests. Neben diesen neuen Funktionen behält das D9EV alle erweiterten Funktionen des D9 bei, darunter erweiterte ECU-Codierung, PMI, bidirektionale Steuerung, intelligente Topologiekarte für vollständigen Scan auf OE-Ebene, schrittweise geführte Funktionen für VAG und Unterstützung für DoIP- und CAN-FD-Protokolle. Es deckt über 10.000 Fahrzeugmodelle ab und gewährleistet so eine umfassende Abdeckung für Kfz-Profis.

Hauptmerkmale

  1. EV-spezifische Diagnose und Batteriepackanalyse

    • Greifen Sie auf Hochspannungssystemmodule zu, um Codes zu lesen und zu löschen und Livedaten anzuzeigen.
    • Führen Sie mit nur einem Klick eine Akkupackanalyse durch und ermitteln Sie SOC, SOH, Spannung, Temperatur und mehr.
    • Jumper-Anschlussdiagramm mit Optionen für die komplette Pflege von Elektrofahrzeugen.
  2. Intelligente Topologiekarte

    • Ermöglicht die einfache Anzeige des Status zwischen verschiedenen Modulen.
    • Identifizieren Sie fehlerhafte Module schnell mit Fehlercodeprüfungen per Mausklick und grafischen Livedaten.
    • Reduziert das Rätselraten und spart Zeit mit 60 % schnelleren System-Scans.
    • Hinweis: Die Verfügbarkeit kann je nach Fahrzeug variieren.
  3. ECU-Codierung und -Programmierung

    • Offline-Programmierung (PMI) für Fahrzeuge von Ford, Lincoln und Mazda zum Aktualisieren der ECU-Software/Firmware.
    • ECU-Codierung und geführte Funktionen für VW/Audi/Skoda zum Zuordnen und Codieren neuer ECUs sowie zum Anpassen der Fahrzeugeinstellungen.
    • Hinweis: Nur für bestimmte Fahrzeuge verfügbar.
  4. Vollständige bidirektionale Steuerungen/aktive Tests

    • Senden Sie Befehle an Fahrzeugmodule und empfangen Sie Informationen von der ECU für aktive Tests.
    • Führen Sie Tests wie EVAP, Kompression, Kühlerlüfter, ABS-Pumpenzyklus durch und steuern Sie Fenster, Scheibenwischer, Schiebedach und Türen.
    • Hinweis: Die Verfügbarkeit des Menüs „Aktive Tests“ ist je nach Fahrzeug unterschiedlich.
  5. 42+ Umfassende Dienstleistungen

    • Beinhaltet Ölrücksetzung, EPB, SAS, Drosselklappe, BMS, ABS-Entlüftung, Injektorcodierung, Schlüsselanhänger-Programmierung, Kraftstoff-Trimmrücksetzung, Zylinderleistungsausgleich, Neulernen der Kurbelwellensensoren und mehr.
    • Hinweis: Überprüfen Sie vor dem Kauf die Kompatibilität mit der Fahrgestellnummer.
  6. Erweiterbare Funktionen

    • Kompatibel mit Add-ons wie professionellen Schlüsselprogrammierern (KC100, KC501, KS1, KS2, M821), digitaler Inspektionskamera (XV100) und EEPROM-Adapter.
    • Hinweis: Add-Ons sind nicht im Lieferumfang enthalten und müssen separat erworben werden.
  7. Software-Updates und technischer Support

    • Beinhaltet 3 Jahre Software-Updates für optimierte Funktionen mit Wi-Fi-Updates per Mausklick.
    • Bietet 2 Jahre reaktionsschnellen technischen Support für zuverlässigen Kundenservice.

Kompatibilität

Bitte überprüfen Sie vor dem Kauf des XTOOL D9EV die Kompatibilität mit Ihrem spezifischen Fahrzeugmodell.

Gondozási információk

Kérjük, vegye figyelembe, hogy a járműdiagnosztikai szkennerekkel elérhető diagnosztikai funkciók az adott járműgyártótól, modelltől és évjárattól függően változhatnak. Bár ezek a szkennerek átfogó diagnosztikai lehetőségeket biztosítanak, bizonyos járműmárkák vagy modellek egyedi rendszerekkel vagy szabadalmaztatott protokollokkal rendelkezhetnek, amelyek korlátozhatják vagy javíthatják az elérhető funkciókat. A problémák elkerülése érdekében, kérjük, vásárlás előtt lépjen kapcsolatba velünk a megerősítésért.

Szállítás és szállítás

  • Adómentes
  • 2 év garancia
  • élethosszig tartó technikai támogatás.
  • Pénzvisszafizetési garancia
  • Ingyenes szállítás
  • 2-5 napos gyors szállítás

Ingyenes szállítás

2-5 nap gyors és ingyenes szállítás.

Duty-free shipping from our overseas warehouses in US, CA, MX, EU, UK, RU,AU, SA

Fizetés és biztonság

Fizetési módok

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Fizetési adatait biztonságosan dolgozzuk fel. Nem tárolunk hitelkártyaadatokat, és nem férünk hozzá az Ön hitelkártyaadataihoz.

f984d2c6-6553-4008-93ca-151f8eb1fed7__cr00970600_pt0_sx970_v1_____PID:926af19d-f495-48b9-97c4-9879a3e1f904

This XTOOL D9EV automotive diagnostic scanner combines nearly all advanced diagnostic features to meets your above needs:

  • HV System Diagnostics & Battery Pack Analysis: Access into the HV system modules for EV vehicles to locate car faults by reading and clearing codes, live data, also monitor battery pack status, provides Jumper Connection Diagram.
  • OE-Level Full System Diagnostic with Topplogy Module Mapping: With Topplogy Map for faster full system diagnostic to view the communication structure between modules clearly with all the situation of each system.
  • 42+ Maintenance Services & Full Special Functions: Provides more options to professionals than they ever going to need for daily auto maintenance services jobs including those most used and those not.
  • New added Programmable Module Installation(PMI) function: When you replace or initialize a new/used module fo Ford/for Lincoln/for Mazda, XTOOL D9EV allows you to copy the data from the original module and install it to the new unit to finish the module replacement.
  • Bi-Directional Control: Full control over all various vehicles components to perform active tests to pinpoint car issues.
  • Support CAN FD/DoIP: Access new communication protocols of CANFD (for GM MY2020+ models), and DOIP (for BMW E/F/G Chassis, for Jaguar, for Land Rover vehicle makes)
  • Advanced ECU Coding & Refresh Hidden Functions: XTOOL D9EV performs Online Coding to flash the hidden features, Personalized Settings, or disable the annoying functions, and reprogram the adaptive data for certain components after repairs or replacements.
  • Guided Functions: Help your diagnostic step by step with instructions for VW/for Audi/for Skoda, etc.
  • Top Hardward Configuration: Android 10.0 systems, 9.7'' Touch Screen, 10000mAh Battery, 1024*768 Resolution, Quad-Core 1.8GHz CPU Processor, 2G RAM & 128G
  • BT Connection & Wired Connection via USB Type B cable: 2.4Ghz & 5Ghz WiFi, BT Connection make it easy to move from the dash to the front of the car. With the USB cable along with Bluetooth, the user has convenience along with certainty that the system will work one way or another.
1c74e07b-5a11-47e5-a0aa-1fb5192cace4__cr00970600_pt0_sx970_v1_____PID:cc793313-2423-4e19-b64b-b27d367f02f2

Why XTOOL D9EV can work as a car doctor for New Energy Vehicles?

Based on the needs of EVs for electronic control system and the battery diagnostics, XTOOL D9EV with new developed diagnostics functions, can easily diagnose high-voltage system, obtain detailed information on each module of the battery pack and locate faults, and diagnose electric control modules such as motors, which is unlike traditional diagnostic tools. It provides HV system and battery pack diagnostics:

OE-Level High-voltage System Diagnostics

Like “dealership” EV scan tools, it can read & clear DTCs & live Data of EV vehicles exclusive high-voltage system with just one click. It provides a comprehensive overview of the entire HV system structure and identifies the location of faulty parts. It also provides Jumper Connection Diagram with connecting options via Jumpers for your complete EV vehicle care.

In-Vehicle/ Out-of-Vehicle Battery Pack Analysis

D9EV allows to you deeply check the battery working status with battery modules both installed in vehicle or out of vehicle. This helpful function shows each battery module's exact location, displays the State of Charge (SOC) and State of Health (SOH) of the battery pack, along with other important data such as voltage, current, and temperature for easy comprehension of complex EV battery information.

dfdae046-f2cb-4149-9e44-7cbc9fd15779__cr00970600_pt0_sx970_v1_____PID:f284cf85-7d0b-4495-a60b-469562099215

XTOOL D9EV Car Diagnostic Scanner, ALL-IN-ONE Scan Tool for Pro Techs!

Advanced ECU Coding
XTOOL D9EV scanner can perform online coding, components matching, adaptive data reset and flash hidden functions, to enhance vehicle performance and personalize car settings after replacing the ECU by: Online/Offline ECU coding, Refresh Hidden Functions, Guided Functions for VAG!*Not work on all vehicles, please check the compatibility first!

PMI Functions
XTOOL D9EV scanner diagnostic scan tool allows you to copy the data from the old/damaged module module and install it to the new unit to finish the module replacement, offers solution for Ford/Lincoln/Mazda after replacing the module.Note: Only works for Ford/Lincoln/Mazda, not all modules can be supported, please provide the VIN & modules for compatibility checking via Info@xtoolglobal.com

OE Full Systems Diagnostics
Performs in-depth diagnostics for all available systems: Engine, Trans, Body, SRS, Brake, Chassis, HVAC, Fuel, etc. It can read/clear codes, view ECU info, freeze frame, view live data like oil/transmission/coolant temp, speed/O2 sensors, engine rpm, long/short fuel trim, cylinder rates, battery voltage, and more).

Bidirectional Control
XTOOL D9EV car scanner diagnostic tool can use active tests to output commands to the ECU, to turn on/off control modules or components without using the vehicle controls, thus saving diagnosis time, such as Open/Close Windows | Doors | Sunroof, Turn on/off Lights | Radiator Fan | Sound Horn | Fuel Pump, Modulate the Throttle, Operate Mirrors, Test Door Lock, etc.

Live Data Graphing
8-In-1 Graphing: Allow you to customize specific PID, and merge graphs for up to 8 data PIDs combined at one time in one view.✔ Graph up to 8 sensors individually on the same screen.

CAN FD & DoIP Protocol
With CAN FD protocol to support for GM 2020+ vehicles, ✔ with DoIP protocol to support for BMW E/F/G Chassis, for Jaguar/for Land Rover.

CAN FD & DoIP Protocol
With CAN FD protocol to support for GM 2020+ vehicles, ✔ with DoIP protocol to support for BMW E/F/G Chassis, for Jaguar/for Land Rover.

14248283-5482-40fe-a149-0091800264a6__cr00970600_pt0_sx970_v1_____PID:6937ae46-6b2b-41c2-82e3-5ee700b3b78d

Get more out of the XTOOL 2024 Newest D9EV Auto Diagnosic Bi-Directional Tool

  • Oil Light Reset
  • BMS Reset
  • Injector Coding
  • Window Initialization
  • A/F settings
  • Language Change
  • Power Balance
  • Speed Limit
  • EGR Relearn
  • VGT Relearn
  • Control unit Reset
  • EPB
  • Throttle
  • Key Programmer
  • Seat Calibration
  • Start/Stop Reset
  • Transporte Mode
  • EEPROM
  • Clutch Adaption
  • FRM Reset
  • HV Battery
  • Odometer Read
  • SAS
  • TPMS Reset
  • Gearbox Match
  • Headlight
  • Airbag Repair
  • Tire Upgrade
  • Electronic Pump Activation
  • SRS
  • Nox Reset
  • A/C Relearn
  • DPF
  • ABS Bleeding
  • Suspension
  • ECU Configuration
  • Instrument Cluster
  • Gear Learning
  • ADAS Calibration
  • AdBlue Reset
  • Write VIN
  • Rain/Light Sensor

*NOTE: Special functions available vary across vehicles. Please check compatibility with the VIN and the required functions!

174e7d80-4162-416b-91c4-97ff3b4d4760__cr00970600_pt0_sx970_v1_____PID:0a170656-6dad-48bf-a276-331f031c92ca

Intelligent Topology Mapping To Boost Repair Efficiency By 65%

XTOOL D9EV smart diagnostic tool features Module Topology to scan all available car modules and show color coded diagnosis status in tree mapping that reveals the underlying communication structures between modules.

  • Get diagnostic results in color coded modules at one glance
  • Dive into the fault right on the tree mapping
  • Prevent “false” fixes by considering all inter-connected modules to boost repair efficiency by 65%

NOTE: Module Topology are not available to all vehicle makes for now. Available for GM, for CHRYSLER, for JEEP, for DODGE, for FORD, for TOYOTA, for NISSAN, for HONDA, for BMW, for BENZ, for HYUNDAI, for MAZDA, ect.

9d18dd4e-02ca-4bce-b2b2-5df29f19843d__cr00970600_pt0_sx970_v1_____PID:534a0849-4336-4a96-a279-2140ec498d0b
  • BT connection & Wired connection: XTOOL D9EV offers BT connection feature to achieve remote diagnosis at a long range, get rid of the shackles of cables, make it easy to move from the dash to the front of the car. Besides, you can use the USB to Type B cable to achieve wired connection.
  • One Click WIFI Update: D9EV car automotive scanner With 2-Year Free Software Update, you are free to update available softwares in any times. Recommend to download the newest software if it is available to get the best experience, as we always focus on our scanner to optimize user experience and improve software issues, improve vehicle coverage and the accuracy of repair.
  • AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
  • Cover 14+ menu languages: XTOOL diagnostic tool D9EV Supports 14+ menu language. Please send the Serial Number(S/N) to change English to Spanish, Portuguese, French, Japanese, German, Polish, Russian, Italian, Korean, Dutch, Swedish, etc.
  • Report share and print: D9EV auto diagnostic scan tool enables diagnostic tech or mechanics to generate diagnostic reports before and after car diagnostics and maintenance services by printing it out or sending it to customers via PDF.
  • Cover 10,000+ Vehicles, Up to 2022, 2021, including cars, SUVs, minvans, 12v light-duty trucks
  • Support CAN FD Protocol: With CAN FD protocol covers with GM MY2020+ models. No extra CAN FD adapter needed.
  • Guided Functions: With VAG Guide Functions, D9EV can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/for Audi/for Skoda, etc.
ee6d9443-90f0-40ff-beae-a4364a01a293__cr00970600_pt0_sx970_v1_____PID:8fb0f9ee-adb5-4baf-a1fd-861ff0410c3e

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
XTOOL

XTOOL D9EV

€2.533,95 EUR

Der leistungsstärkste Scanner mit High-End-Funktionen für Elektrofahrzeuge und Kraftstoffe

Das XTOOL D9EV ist ein hochmodernes Diagnosetool, das speziell für Elektrofahrzeuge (EVs) entwickelt wurde. Dieser professionelle Autoscanner ist ein Upgrade des beliebten D9-Modells und enthält leistungsstarke neue Funktionen wie EV-Diagnose, Offline-Batteriepackanalyse und Hochspannungssystemtests. Neben diesen neuen Funktionen behält das D9EV alle erweiterten Funktionen des D9 bei, darunter erweiterte ECU-Codierung, PMI, bidirektionale Steuerung, intelligente Topologiekarte für vollständigen Scan auf OE-Ebene, schrittweise geführte Funktionen für VAG und Unterstützung für DoIP- und CAN-FD-Protokolle. Es deckt über 10.000 Fahrzeugmodelle ab und gewährleistet so eine umfassende Abdeckung für Kfz-Profis.

Hauptmerkmale

  1. EV-spezifische Diagnose und Batteriepackanalyse

    • Greifen Sie auf Hochspannungssystemmodule zu, um Codes zu lesen und zu löschen und Livedaten anzuzeigen.
    • Führen Sie mit nur einem Klick eine Akkupackanalyse durch und ermitteln Sie SOC, SOH, Spannung, Temperatur und mehr.
    • Jumper-Anschlussdiagramm mit Optionen für die komplette Pflege von Elektrofahrzeugen.
  2. Intelligente Topologiekarte

    • Ermöglicht die einfache Anzeige des Status zwischen verschiedenen Modulen.
    • Identifizieren Sie fehlerhafte Module schnell mit Fehlercodeprüfungen per Mausklick und grafischen Livedaten.
    • Reduziert das Rätselraten und spart Zeit mit 60 % schnelleren System-Scans.
    • Hinweis: Die Verfügbarkeit kann je nach Fahrzeug variieren.
  3. ECU-Codierung und -Programmierung

    • Offline-Programmierung (PMI) für Fahrzeuge von Ford, Lincoln und Mazda zum Aktualisieren der ECU-Software/Firmware.
    • ECU-Codierung und geführte Funktionen für VW/Audi/Skoda zum Zuordnen und Codieren neuer ECUs sowie zum Anpassen der Fahrzeugeinstellungen.
    • Hinweis: Nur für bestimmte Fahrzeuge verfügbar.
  4. Vollständige bidirektionale Steuerungen/aktive Tests

    • Senden Sie Befehle an Fahrzeugmodule und empfangen Sie Informationen von der ECU für aktive Tests.
    • Führen Sie Tests wie EVAP, Kompression, Kühlerlüfter, ABS-Pumpenzyklus durch und steuern Sie Fenster, Scheibenwischer, Schiebedach und Türen.
    • Hinweis: Die Verfügbarkeit des Menüs „Aktive Tests“ ist je nach Fahrzeug unterschiedlich.
  5. 42+ Umfassende Dienstleistungen

    • Beinhaltet Ölrücksetzung, EPB, SAS, Drosselklappe, BMS, ABS-Entlüftung, Injektorcodierung, Schlüsselanhänger-Programmierung, Kraftstoff-Trimmrücksetzung, Zylinderleistungsausgleich, Neulernen der Kurbelwellensensoren und mehr.
    • Hinweis: Überprüfen Sie vor dem Kauf die Kompatibilität mit der Fahrgestellnummer.
  6. Erweiterbare Funktionen

    • Kompatibel mit Add-ons wie professionellen Schlüsselprogrammierern (KC100, KC501, KS1, KS2, M821), digitaler Inspektionskamera (XV100) und EEPROM-Adapter.
    • Hinweis: Add-Ons sind nicht im Lieferumfang enthalten und müssen separat erworben werden.
  7. Software-Updates und technischer Support

    • Beinhaltet 3 Jahre Software-Updates für optimierte Funktionen mit Wi-Fi-Updates per Mausklick.
    • Bietet 2 Jahre reaktionsschnellen technischen Support für zuverlässigen Kundenservice.

Kompatibilität

Bitte überprüfen Sie vor dem Kauf des XTOOL D9EV die Kompatibilität mit Ihrem spezifischen Fahrzeugmodell.

Termék megtekintése