XTOOL D9EV
XTOOL D9EV er restordret og sendes så snart det er på lager igen.
Kunne ikke indlæse tilgængeligheden af afhentning
Beskrivelse
Beskrivelse
Den mest kraftfulde scanner med avancerede funktioner til både elbiler eller brændstof
XTOOL D9EV er et banebrydende diagnoseværktøj specielt designet til elektriske køretøjer (EV'er). Denne professionelle autoscanner er en opgradering fra den populære D9-model, der indeholder kraftfulde nye funktioner såsom EV-diagnostik, offline batteripakkeanalyse og test af højspændingssystem. Udover disse nye funktioner bevarer D9EV alle de avancerede funktioner fra D9, herunder avanceret ECU-kodning, PMI, tovejskontrol, intelligent topologikort til OE-niveau fuld scanning, trin-for-trin guidede funktioner til VAG og support til DoIP & CAN FD protokoller. Den dækker over 10.000 køretøjsmodeller, hvilket sikrer omfattende dækning for professionelle biler.
Nøglefunktioner
EV-specifik diagnostik og batteripakkeanalyse
- Få adgang til højspændingssystemmoduler for at læse og slette koder, se live-data.
- Udfør et-klik batteripakkeanalyse, der leverer SOC, SOH, spænding, temperatur og mere.
- Jumper forbindelsesdiagram med muligheder for komplet pleje af elbiler.
Intelligent topologi kort
- Tillader nem visning af status mellem forskellige moduler.
- Identificerer hurtigt defekte moduler med et-klik fejlkodetjek og grafiske livedata.
- Reducerer gætværk og sparer tid med 60 % hurtigere systemscanninger.
- Bemærk: Tilgængeligheden kan variere fra køretøj til køretøj.
ECU-kodning og programmering
- Offline programmering (PMI) til Ford-, Lincoln- og Mazda-køretøjer til opdatering af ECU-software/firmware.
- ECU-kodning og guidede funktioner til at matche VW/Audi/Skoda, kode nye ECU'er og tilpasse bilindstillinger.
- Bemærk: Kun tilgængelig for specifikke køretøjer.
Fuld tovejskontrol/aktive tests
- Send kommandoer til køretøjsmoduler og modtag information fra ECU'en til aktive tests.
- Udfør test som EVAP, kompression, køleventilator, ABS-pumpecykling og kontrol af vinduer, vinduesviskere, soltag og døre.
- Bemærk: Tilgængeligheden af Active Tests-menuen varierer på tværs af køretøjer.
42+ Omfattende tjenester
- Inkluderer olienulstilling, EPB, SAS, gasspjæld, BMS, ABS-udluftning, injektorkodning, nøglebrikkeprogrammering, nulstilling af brændstoftrim, cylinderkraftbalance, genindlæring af krumtapakselsensorer og mere.
- Bemærk: Tjek kompatibilitet med VIN # før køb.
Udvidbare muligheder
- Kompatibel med tilføjelser som professionelle nøgleprogrammører (KC100, KC501, KS1, KS2, M821), digitalt inspektionskamera (XV100) og EEPROM-adapter.
- Bemærk: Tilføjelser er ikke inkluderet og skal købes separat.
Softwareopdateringer og teknisk support
- Inkluderer 3 års softwareopdateringer til optimerede funktioner med Wi-Fi-opdateringer med et enkelt klik.
- Giver 2 års responsiv teknisk support til pålidelig kundeservice.
Kompatibilitet
Før du køber XTOOL D9EV, skal du kontrollere kompatibiliteten med din specifikke køretøjsmodel.
Plejeoplysninger
Plejeoplysninger
Vær opmærksom på, at de diagnostiske funktioner, der er tilgængelige med køretøjsdiagnosescannere, kan variere afhængigt af den specifikke køretøjsproducent, model og årgang. Selvom disse scannere giver omfattende diagnostiske muligheder, kan visse køretøjsmærker eller -modeller have unikke systemer eller proprietære protokoller, der enten kan begrænse eller forbedre de tilgængelige funktioner. For at undgå problemer for dig, bedes du kontakte os for bekræftelse før køb.
Levering og forsendelse
Levering og forsendelse
- Skattefri
- 2 års garanti
- livslang teknisk support.
- Pengene-tilbage-garanti
- Gratis forsendelse
- 2-5 dages hurtig levering
Betaling & Sikkerhed
Betalingsmetoder
Dine betalingsoplysninger behandles sikkert. Vi gemmer ikke kreditkortoplysninger og har heller ikke adgang til dine kreditkortoplysninger.
This XTOOL D9EV automotive diagnostic scanner combines nearly all advanced diagnostic features to meets your above needs:
- HV System Diagnostics & Battery Pack Analysis: Access into the HV system modules for EV vehicles to locate car faults by reading and clearing codes, live data, also monitor battery pack status, provides Jumper Connection Diagram.
- OE-Level Full System Diagnostic with Topplogy Module Mapping: With Topplogy Map for faster full system diagnostic to view the communication structure between modules clearly with all the situation of each system.
- 42+ Maintenance Services & Full Special Functions: Provides more options to professionals than they ever going to need for daily auto maintenance services jobs including those most used and those not.
- New added Programmable Module Installation(PMI) function: When you replace or initialize a new/used module fo Ford/for Lincoln/for Mazda, XTOOL D9EV allows you to copy the data from the original module and install it to the new unit to finish the module replacement.
- Bi-Directional Control: Full control over all various vehicles components to perform active tests to pinpoint car issues.
- Support CAN FD/DoIP: Access new communication protocols of CANFD (for GM MY2020+ models), and DOIP (for BMW E/F/G Chassis, for Jaguar, for Land Rover vehicle makes)
- Advanced ECU Coding & Refresh Hidden Functions: XTOOL D9EV performs Online Coding to flash the hidden features, Personalized Settings, or disable the annoying functions, and reprogram the adaptive data for certain components after repairs or replacements.
- Guided Functions: Help your diagnostic step by step with instructions for VW/for Audi/for Skoda, etc.
- Top Hardward Configuration: Android 10.0 systems, 9.7'' Touch Screen, 10000mAh Battery, 1024*768 Resolution, Quad-Core 1.8GHz CPU Processor, 2G RAM & 128G
- BT Connection & Wired Connection via USB Type B cable: 2.4Ghz & 5Ghz WiFi, BT Connection make it easy to move from the dash to the front of the car. With the USB cable along with Bluetooth, the user has convenience along with certainty that the system will work one way or another.
Why XTOOL D9EV can work as a car doctor for New Energy Vehicles?
Based on the needs of EVs for electronic control system and the battery diagnostics, XTOOL D9EV with new developed diagnostics functions, can easily diagnose high-voltage system, obtain detailed information on each module of the battery pack and locate faults, and diagnose electric control modules such as motors, which is unlike traditional diagnostic tools. It provides HV system and battery pack diagnostics:
OE-Level High-voltage System Diagnostics
Like “dealership” EV scan tools, it can read & clear DTCs & live Data of EV vehicles exclusive high-voltage system with just one click. It provides a comprehensive overview of the entire HV system structure and identifies the location of faulty parts. It also provides Jumper Connection Diagram with connecting options via Jumpers for your complete EV vehicle care.
In-Vehicle/ Out-of-Vehicle Battery Pack Analysis
D9EV allows to you deeply check the battery working status with battery modules both installed in vehicle or out of vehicle. This helpful function shows each battery module's exact location, displays the State of Charge (SOC) and State of Health (SOH) of the battery pack, along with other important data such as voltage, current, and temperature for easy comprehension of complex EV battery information.
XTOOL D9EV Car Diagnostic Scanner, ALL-IN-ONE Scan Tool for Pro Techs!
Advanced ECU Coding
XTOOL D9EV scanner can perform online coding, components matching, adaptive data reset and flash hidden functions, to enhance vehicle performance and personalize car settings after replacing the ECU by: Online/Offline ECU coding, Refresh Hidden Functions, Guided Functions for VAG!*Not work on all vehicles, please check the compatibility first!
PMI Functions
XTOOL D9EV scanner diagnostic scan tool allows you to copy the data from the old/damaged module module and install it to the new unit to finish the module replacement, offers solution for Ford/Lincoln/Mazda after replacing the module.Note: Only works for Ford/Lincoln/Mazda, not all modules can be supported, please provide the VIN & modules for compatibility checking via Info@xtoolglobal.com
OE Full Systems Diagnostics
Performs in-depth diagnostics for all available systems: Engine, Trans, Body, SRS, Brake, Chassis, HVAC, Fuel, etc. It can read/clear codes, view ECU info, freeze frame, view live data like oil/transmission/coolant temp, speed/O2 sensors, engine rpm, long/short fuel trim, cylinder rates, battery voltage, and more).
Bidirectional Control
XTOOL D9EV car scanner diagnostic tool can use active tests to output commands to the ECU, to turn on/off control modules or components without using the vehicle controls, thus saving diagnosis time, such as Open/Close Windows | Doors | Sunroof, Turn on/off Lights | Radiator Fan | Sound Horn | Fuel Pump, Modulate the Throttle, Operate Mirrors, Test Door Lock, etc.
Live Data Graphing
8-In-1 Graphing: Allow you to customize specific PID, and merge graphs for up to 8 data PIDs combined at one time in one view.✔ Graph up to 8 sensors individually on the same screen.
CAN FD & DoIP Protocol
With CAN FD protocol to support for GM 2020+ vehicles, ✔ with DoIP protocol to support for BMW E/F/G Chassis, for Jaguar/for Land Rover.
CAN FD & DoIP Protocol
With CAN FD protocol to support for GM 2020+ vehicles, ✔ with DoIP protocol to support for BMW E/F/G Chassis, for Jaguar/for Land Rover.
Get more out of the XTOOL 2024 Newest D9EV Auto Diagnosic Bi-Directional Tool
- Oil Light Reset
- BMS Reset
- Injector Coding
- Window Initialization
- A/F settings
- Language Change
- Power Balance
- Speed Limit
- EGR Relearn
- VGT Relearn
- Control unit Reset
- EPB
- Throttle
- Key Programmer
- Seat Calibration
- Start/Stop Reset
- Transporte Mode
- EEPROM
- Clutch Adaption
- FRM Reset
- HV Battery
- Odometer Read
- SAS
- TPMS Reset
- Gearbox Match
- Headlight
- Airbag Repair
- Tire Upgrade
- Electronic Pump Activation
- SRS
- Nox Reset
- A/C Relearn
- DPF
- ABS Bleeding
- Suspension
- ECU Configuration
- Instrument Cluster
- Gear Learning
- ADAS Calibration
- AdBlue Reset
- Write VIN
- Rain/Light Sensor
*NOTE: Special functions available vary across vehicles. Please check compatibility with the VIN and the required functions!
Intelligent Topology Mapping To Boost Repair Efficiency By 65%
XTOOL D9EV smart diagnostic tool features Module Topology to scan all available car modules and show color coded diagnosis status in tree mapping that reveals the underlying communication structures between modules.
- Get diagnostic results in color coded modules at one glance
- Dive into the fault right on the tree mapping
- Prevent “false” fixes by considering all inter-connected modules to boost repair efficiency by 65%
NOTE: Module Topology are not available to all vehicle makes for now. Available for GM, for CHRYSLER, for JEEP, for DODGE, for FORD, for TOYOTA, for NISSAN, for HONDA, for BMW, for BENZ, for HYUNDAI, for MAZDA, ect.
- BT connection & Wired connection: XTOOL D9EV offers BT connection feature to achieve remote diagnosis at a long range, get rid of the shackles of cables, make it easy to move from the dash to the front of the car. Besides, you can use the USB to Type B cable to achieve wired connection.
- One Click WIFI Update: D9EV car automotive scanner With 2-Year Free Software Update, you are free to update available softwares in any times. Recommend to download the newest software if it is available to get the best experience, as we always focus on our scanner to optimize user experience and improve software issues, improve vehicle coverage and the accuracy of repair.
- AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.
- Cover 14+ menu languages: XTOOL diagnostic tool D9EV Supports 14+ menu language. Please send the Serial Number(S/N) to change English to Spanish, Portuguese, French, Japanese, German, Polish, Russian, Italian, Korean, Dutch, Swedish, etc.
- Report share and print: D9EV auto diagnostic scan tool enables diagnostic tech or mechanics to generate diagnostic reports before and after car diagnostics and maintenance services by printing it out or sending it to customers via PDF.
- Cover 10,000+ Vehicles, Up to 2022, 2021, including cars, SUVs, minvans, 12v light-duty trucks
- Support CAN FD Protocol: With CAN FD protocol covers with GM MY2020+ models. No extra CAN FD adapter needed.
- Guided Functions: With VAG Guide Functions, D9EV can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/for Audi/for Skoda, etc.